Product data sheet:
Round Jet Blowing Nozzle Series BS - G1/2"
| Range | Blowing |
|---|---|
| Category | Blower nozzles |
| Kind | Indirect Round Jet |
| Connection | G1/2" male |
| Series | BS |
| Height (in mm) | 97 |
Variant reference: BS 12
- Matter: Aluminum
Variant reference: BS 12 ACI
- Matter: 316L Stainless Steel
TECHNICAL INFORMATION
| BENEFITS OF USING THE BLOWING NOZZLE BS 12* (compared with an open pipe Ø12 internal) |
Reduction in air consumption (%) |
Noise reduction (%) | ||||||
|---|---|---|---|---|---|---|---|---|
| up to -71% |
up to -20% |
|||||||
| PERFORMANCE OF THE BLOWING NOZZLE BS 12* |
Pressure (bar) | Air consumption (l/min) | Thrust force (N) | Noise level (dB) | Blowing flow (l/min) | |||
| at 150mm | at 450mm | |||||||
| 2 | 1300 | 13 | 10 | 87.5 | 4650 | |||
| 6 | 3500 | 31.3 | 25.5 | 95 | 7360 | |||
| VS | ||||||||
| OPEN PIPE Ø12 INTERNAL* |
Pressure (bar) | Air consumption (l/min) | Noise level (dB) | Blowing flow (l/min) | ||||
| 6 | 4450 | 110 | 4450 | |||||
BS 12 BLOWING NOZZLE SPECIFICATIONS
• Connection: Male G1/2" • Weight: Aluminium: 130g / 316L stainless steel: 390g
• Maximum operating temperature: Aluminium: 150 °C / 316L stainless steel: 450 °C • Maximum pressure: 10 bar
* NOTE: The measurements presented in this technical data sheet were carried out in a laboratory under strictly controlled conditions.
It is important to note that conditions in an actual industrial environment may differ and that pressure instability from an industrial compressor may result in values different from those obtained in the laboratory.
This data is provided for information purposes only.
For optimum blowing nozzle performance, we recommend a compressed air supply hose with a minimum internal diameter of 12 mm.
DESCRIPTION
NOVACOM develops and designs round, indirect-jet blowing nozzles in France.
The nozzle produces a high-speed, constant and uniform airflow over the entire surface of the nozzle. Thanks to the Coanda effect, a phenomenon in fluid mechanics, ambient air is drawn in, increasing the initial airflow.
Ideal for energy-efficient blowing operations, as well as for cleaning or cooling.
To adjust the nozzle airflow, you will need a 4 mm hex key. First, loosen the M5 screw. Then turn the nozzle counterclockwise. Once the desired airflow has been obtained, retighten the M5 screw.
