Product data sheet:
Feed Ejector Series TP - Cannula Ø17mm
| Range | Venturi |
|---|---|
| Category | Pneumatic conveying |
| Matter | Aluminum |
| Height (in mm) | 35 |
| Outer diameter | 17 mm |
| Inner diameter | 9.6 mm |
| AC connection | G1/8" |
Øint 9.60mm - G1/8' fitting - Aluminum Cannula with a diameter of 17mm to facilitate tube connection,
Model only in aluminum
TECHNICAL INFORMATION
| USAGE BENEFITS OF VENTURI TP 19 C17* |
Pressure (bar) | Air consumption (Nl/min) | Sound level (dB) | Suction (Nl/min) | Amplified air (l/min) | ||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 6 | 425 | 102 | 790 | 2210 | |||||||
TP 19 C17* CHARACTERISTICS
• Connection: Female G1/8" - Cannula with a diameter of 17mm • Weight: Aluminum: 104.1g • Max operating temperature: 80°C
• Max pressure: 7 bars • Materials:: Aluminum, standard nitrile seal
* NOTE: We recommend supplying the TP 19 C17 with compressed air using an 8mm inner diameter tube
to achieve optimal performance.
The TP venturis are installed inline on a pipeline. Supplied with compressed air through their side port, they transport objects or materials.
Key features
• Very high suction flow rates
• Instant on/off
• No maintenance
• Explosion-proof
• Low cost and compact size
Applications
• Suction and transfer of powders, granules, cutting waste, punching waste (foam, leather, etc.) or small light pieces (paper clips, rice, coffee, etc.)
• Transport of balls or plastic media
• Smoke extraction
• Depressurization of enclosures