Product data sheet:
Round Jet Blowing Nozzle BS Series - G1/4"
| Range | Blowing |
|---|---|
| Category | Blower nozzles |
| Kind | Direct Round Jet |
| Connection | G1/4" Female |
| Series | BS |
| Height (in mm) | 31.8 |
Variant reference: BS 5 F14
- Matter: Aluminum
Variant reference: BS 5 F14 ACI
- Matter: 316L Stainless Steel
TECHNICAL INFORMATION
| BENEFITS OF USING THE BLOWING NOZZLE BS 5 F14* (compared with an open pipe) |
Increase in blowing flow (%) |
Noise reduction (%) | ||||||
|---|---|---|---|---|---|---|---|---|
| up to +93.5% |
up to -41% |
|||||||
| PERFORMANCE OF THE BLOWING NOZZLE BS 5 F14* |
Pressure (bar) | Air consumption (l/min) | Thrust force (N) | Noise level (dB) | Blowing flow (l/min) | |||
| at 150mm | at 450mm | |||||||
| 6 | 525 | 5 | 4.3 | 70 | 3270 | |||
| VS | ||||||||
| OPEN PIPE Ø8 INTERNAL* |
Pressure (bar) | Air consumption (l/min) | Noise level (dB) | Blowing flow (l/min) | ||||
| 6 | 2550 | 108 | 2550 | |||||
BS 5 F14 BLOWING NOZZLE SPECIFICATIONS*
• Connection: Male G1/4" • Weight: Aluminium: 9g / 316L stainless steel: 25g
• Maximum operating temperature: Aluminium: 150 °C / 316L stainless steel: 450°C • Maximum pressure: 10 bar
* NOTE: The measurements presented in this technical data sheet were carried out in a laboratory under strictly controlled conditions.
It is important to note that conditions in an actual industrial environment may differ and that pressure instability from an industrial compressor may result in values different from those obtained in the laboratory. This data is provided for information purposes only.
For optimum blowing nozzle performance, we recommend a compressed air supply hose with a minimum internal diameter of 5.5 mm.
