Product data sheet:
AA - 030 Series Air Amplifier
| Range | Blowing |
|---|---|
| Category | Air amplifiers |
| Connection | G1/2" Female |
| Height (in mm) | 127.1 |
| Outer diameter | 126.2 mm |
Variant reference: AA 030
- Matter: Aluminum
Variant reference: AA 030 ACI
- Matter: 316L Stainless Steel
TECHNICAL INFORMATION
| BENEFITS OF USING THE AIR AMPLIFIER AA 030* |
Pressure (bar) |
Air consumption (l/min) |
Noise level (dB) |
Surrounding air drawn in (l/min) | Amplified air blowing (l/min) | |||
|---|---|---|---|---|---|---|---|---|
| 6 | 2100 | 93 | 3350 | 49230 | ||||
AA 030* AIR AMPLIFIER CHARACTERISTICS
• Connection: 2 x Female G1/2" • Passage ⌀: 76mm • Mass: Aluminum: 1234g / Stainless Steel 316 L: 3627g
• Max usage temperature: Aluminum: 150 °C / Stainless Steel 316 L: 450°C • Max pressure: 10 bars
* NOTE: The measurements presented in this technical sheet were conducted in a laboratory, in a strictly controlled environment.
It is important to note that conditions in a real industrial environment may differ and that the instability of an industrial compressor's pressure could result in different values from those obtained in the laboratory. This data is provided for informational purposes only.
To achieve optimal performance of the blowing nozzle, we recommend a compressed air supply hose with a minimum inner diameter of 12 mm.
The value of the amplified air uses Boyle's law.
Compressed air has a smaller air volume than relaxed air and is expressed by the formula: P1xV1=P2xV2.
In our case V1 = consumed air + drawn-in air.
