| Material | Anodised Aluminium |
|---|---|
| Type | Single Flow |
| Length | 938 mm |
| Blowing | 101 942 l/min at 5.5 bar |
Previous
Next
TECHNICAL INFORMATION
| BENEFITS OF USING A RA-2 900* AIR KNIFE (Compared to a open pipe) |
Increase of blowing force (%) |
Noise reduction (%) | ||||||
|---|---|---|---|---|---|---|---|---|
| Up to 93% |
Up to 34% |
|||||||
| PERFORMANCES RA-2 900 AIR KNIFE* |
Pressure (bar) | Air Consumption (l/min) | Blowing force (N) | Noise level (dB) | Amplified blowing (l/min) | |||
| at 150mm | at 450mm | |||||||
| 2 | 1700 | 6,2 | 6 | 86 | 42500 | |||
| 6 | 4000 | 16,3 | 15,9 | 95 | 100000 | |||
| VS | ||||||||
| OPEN PIPE Ø8* (opened on 900mm) |
Pressure (bar) | Air consumption (l/min) | Noise level (dB) | Amplified blowing (l/min) | ||||
| 6 | 23200 | 130 | 23200 | |||||
RA-2 900* AIR KNIFE FEATURES*
• Connection : Female G1/4" • Weight : Aluminium : 1835g
• Max. operating temperature : Aluminium : 150 °C • Max Pressure : 10 bars
* NOTE: The measurements in this data sheet have been obtained in a laboratory under strict control. The varying conditions of a real industrial environment and the instability of pressure from an industrial compressor can create different values than the ones obtained in a laboratory. Those data are provided for information purposes only.
To achieve the best performance from the air nozzle, we recommend using a compressed air supply tube with a minimum 8 mm inside diameter opened on 900mm.
You might also like
