| Type | Circular |
|---|---|
| Vacuum Connection | G1/4“ |
| Series | RAC-2 |
| Width | 22 mm |
| Outer Diameter | 76 mm 137 mm |
| Thread | M4 |
Previous
Next
TECHNICAL INFORMATION
| BENEFITS OF USING A RAC-2 76* AIR KNIFE (Compared to a open pipe) |
Increase of blowing force (%) |
Noise reduction (%) | ||||||
|---|---|---|---|---|---|---|---|---|
| Up to 94% |
Up to 35% |
|||||||
| PERFORMANCES RAC-2 76 AIR KNIFE* |
Pressure (bar) | Air Consumption (l/min) | Blowing force (N) | Noise level (dB) | Amplified blowing (l/min) | |||
| at 150mm | at 450mm | |||||||
| 2 | 750 | 4,6 | 4,6 | 84 | 18750 | |||
| 6 | 2150 | 20 | 19,5 | 90 | 53750 | |||
| VS | ||||||||
| OPEN PIPE Ø8* (opened on 150mm) |
Pressure (bar) | Air consumption (l/min) | Noise level (dB) | Amplified blowing (l/min) | ||||
| 6 | 12000 | 130 | 12000 | |||||
RAC-2 76* AIR KNIFE FEATURES*
• Connection : Female G1/4" • Weight : Aluminium : 499g / Stainless steel 316 L : 1423g
• Max. operating temperature : Aluminium : 150 °C / Stainless steel 316 L : 450°C • Max Pressure : 10 bars
* NOTE: The measurements in this data sheet have been obtained in a laboratory under strict control. The varying conditions of a real industrial environment and the instability of pressure from an industrial compressor can create different values than the ones obtained in a laboratory. Those data are provided for information purposes only.
To achieve the best performance from the air nozzle, we recommend using a compressed air supply tube with a minimum 8 mm inside diameter opened on 150mm.