| Type | Circular |
|---|---|
| Vacuum Connection | G1/4“ |
| Series | RAC-2 |
| Width | 22 mm |
| Outer Diameter | 25 mm 86 mm |
| Thread | M4 |
Previous
Next
TECHNICAL INFORMATION
| BENEFITS OF USING A RAC-2 25* AIR KNIFE (Compared to a open pipe) |
Increase of blowing force (%) |
Noise reduction (%) | ||||||
|---|---|---|---|---|---|---|---|---|
| Up to 91% |
Up to 37% |
|||||||
| PERFORMANCES RAC-2 25 AIR KNIFE* |
Pressure (bar) | Air Consumption (l/min) | Blowing force (N) | Noise level (dB) | Amplified blowing (l/min) | |||
| at 150mm | at 450mm | |||||||
| 2 | 465 | 3 | 2,6 | 82 | 11625 | |||
| 6 | 1050 | 8,5 | 7,5 | 90 | 26250 | |||
| VS | ||||||||
| OPEN PIPE Ø8* (opened on 70mm) |
Pressure (bar) | Air consumption (l/min) | Noise level (dB) | Amplified blowing (l/min) | ||||
| 6 | 5400 | 130 | 5400 | |||||
RAC-2 25* AIR KNIFE FEATURES*
• Connection : Female G1/4" • Weight : Aluminium : 273g / Stainless steel 316 L : 758g
• Max. operating temperature : Aluminium : 150 °C / Stainless steel 316 L : 450°C • Max Pressure : 10 bars
* NOTE: The measurements in this data sheet have been obtained in a laboratory under strict control. The varying conditions of a real industrial environment and the instability of pressure from an industrial compressor can create different values than the ones obtained in a laboratory. Those data are provided for information purposes only.
To achieve the best performance from the air nozzle, we recommend using a compressed air supply tube with a minimum 8 mm inside diameter opened on 70mm.