| Type | Round stream |
|---|---|
| Connector | G1/8" |
| Blowing | 6 377 l/min at 5.5 bar |
Previous
Next
TECHNICAL INFORMATION
| BENEFITS OF USING A BS 18 PM* AIR NOZZLE (Compared to a open pipe) |
Reduction in air consumption (%) |
Noise reduction (%) | ||||||
|---|---|---|---|---|---|---|---|---|
| Up to 89% |
Up to 27% |
|||||||
| BLOWING PERFORMANCE BS 18 PM NOZZLE* |
Pressure (bar) | Air Consumption (l/mn) | Blowing force (N) | Noise level (dB) | Amplified blowing (l/min) | |||
| at 150mm | at 450mm | |||||||
| 2 | 130 | 2,3 | 1,7 | 73 | 1450 | |||
| 6 | 360 | 4,1 | 3,9 | 86 | 2800 | |||
| VS | ||||||||
| OPEN PIPE Ø5,5* |
Pressure (bar) | Air consumption (l/mn) | Noise level (dB) | Amplified blowing (l/mn) | ||||
| 6 | 1200 | 110 | 1200 | |||||
BS 18 PM* NOZZLE FEATURES*
• Connection : Male G1/8" • Weight : Brass : 11g / 316 L Stainless steel : 33g
• Max. operating temperature : Aluminium : 200 °C / 316 L Stainless steel : 450°C • Max Pressure : 10 bars
* NOTE: The measurements in this data sheet have been obtained in a laboratory under strict control. The varying conditions of a real industrial environment and the instability of pressure from an industrial compressor can create different values than the ones obtained in a laboratory. Those data are provided for information purposes only.
To achieve the best performance from the air nozzle, we recommend using a compressed air supply tube with a minimum 5,5 mm inside diameter.
You might also like
